Automatic one out six bottle blowing machine GR6-A

当前位置：首页- Automatic one out six bottle blowing machine GR6-A

GR6-A automatic six bottle blowing machine

发布时间:2024-04-25

一、Performance：

AP6-A is suitable for the production of PET bottle blowing: carbonated beverage bottles, mineral water bottles, oil bottles, medicine bottles, cosmetic bottles, cosmetic containers.

☞ The control system adopts the international advanced integrated computer intelligent control system, which has the advantages of high control accuracy, fault self diagnosis, intelligent monitoring, data management, graphical fault display and so on.

☞The combination of man-machine interface and analog switch operation system configuration, easy to replace the system maintenance, to ensure continuous production of machine production

☞The billet system shall be installed with the Attempts to prevent material recovery device, and completely eliminate the phenomenon of blocking the embryo

☞The oven heating system uses the digital instrument to drive the thyristor to realize the voltage regulation control, the oven is equipped with a hot air circulation system, the heater adopts the far infrared lamp pipe, the heat radiation is strong, high efficiency, and can freely adjust the radiation area.

☞The bottle embryo loading adopts the elastic Embedded, and the deformation effect of the bottle seal is remarkable。

☞Adopt the fast diaphragm air valve and unique progressive blowing mode to ensure the product quality is stable. The separation of high and low pressure gas road can greatly improve the stability and safety of machine。

☞Straight pneumatic pressure locking, adjustable, no wear, high reliability, no maintenance.

二、★Main configuration（We choose the world first class component supplier）：

三、★Technical parameters

model

GR6-A

Capacity

up to bottles

6000-7000pcs/h

Bottle size

Volume

≤1.5L

Diameter

≤90mm

Height

≤310mm

Neck diameter

≤30mm

Power

Power voltage

380V/220V 50/60HZ 3phase

loading power

56kw

Running power

18kw

Main-machine

Size(L×W×H)

5000×2800×2200mm

Weight

4800kg

Preform unscrambler

Size(L×W×H)

2300×1500×2480mm

Weight

350kg

Air Source

HP Air compressor

5.0m3/min 3.0Mpa

HP Air compressor

2.0m3/min 1.0Mpa

air

source purification

Air dryer

6.0m3/min 3.0Mpa

oil water separator

6.0m3/min 3.0Mpa

Pre-filter

6.0m3/min 3.0Mpa 0.1um

Precision filter

6.0m3/min 3.0Mpa 0.01um

Ultra precision filter

6.0m3/min 3.0Mpa 0.001um

active carbon filter

6.0m3/min 3.0Mpa

Cooling water

water chiller

5HP

上一条:没有了
下一条: Automatic bottle blowing machine GR6-A 返回列表

model	GR6-A
Capacity	up to bottles	6000-7000pcs/h
Bottle size	Volume	≤1.5L
	Diameter	≤90mm
	Height	≤310mm
	Neck diameter	≤30mm
Power	Power voltage	380V/220V 50/60HZ 3phase
	loading power	56kw
	Running power	18kw
Main-machine	Size(L×W×H)	5000×2800×2200mm
Main-machine	Weight	4800kg
Preform unscrambler	Size(L×W×H)	2300×1500×2480mm
Preform unscrambler	Weight	350kg
Air Source	HP Air compressor	5.0m3/min 3.0Mpa
Air Source	HP Air compressor	2.0m3/min 1.0Mpa
air source purification	Air dryer	6.0m3/min 3.0Mpa
	oil water separator	6.0m3/min 3.0Mpa
	Pre-filter	6.0m3/min 3.0Mpa 0.1um
	Precision filter	6.0m3/min 3.0Mpa 0.01um
	Ultra precision filter	6.0m3/min 3.0Mpa 0.001um
	active carbon filter	6.0m3/min 3.0Mpa
Cooling water	water chiller	5HP